• Touch Screen Display
• Standard RS 232 interface / USB.
• Inbuilt system of internal calibration with initial calibration
• Auto calibration according to change in ambient temperature.
• User selected time calibration
• Various application other than weighing
• Antistatic Ionizer. 
• % Weighig
• Filling
• Check Weighing
• Statistic
• Complies to GLP/GMP
• 100% Tare Range
• Weighing cell with overload protection.
• Protective in-use cover.

• Specialized Large Backlite Alpha numeric LCD Display with A.E.P. (Advance Eye Protection) New.
• Standard RS 232 interface / USB.
• Inbuilt system of internal calibration with initial calibration
• Auto calibration according to change in ambient temperature.
• User selected time calibration
• Various application other than just simple.
• Weighing like
• % Weighig
• Filling
• Check Weighing
• Statistic
• Complies to GLP / GMP
• Automatic Zero Tracking features (can be turned OFF by menu code).

• Specialized Large Backlite Alpha numeric LCD Display with A.E.P. (Advance Eye Protection) New.
• Standard RS 232 interface / USB.
• Inbuilt system of internal calibration with initial calibration
• Auto calibration according to change in ambient temperature.
• User selected time calibration
• Various application other than just simple.
• Weighing like
• %
• Filling
• Check Weighing
• Statistic
• Complies to GLP / GMP
• Automatic Zero Tracking features (can be turned OFF by menu code).

• Specialized Large Backlite Alpha numeric LCD Display with A.E.P. (Advance Eye Protection) New.
• Standard RS 232 interface / USB.
• Inbuilt system of internal calibration with initial calibration
• Auto calibration according to change in ambient temperature.
• User selected time calibration
• Various application other than weighing
• Antistatic Ionizer
• % Weighig
• Filling
• Check Weighing
• Statistic
• Complies to GLP / GMP
• Automatic Zero Tracking features (can be turned OFF by menu code).

• Fully automatic Internal calibration and adjustment feature
• ISO|GLP-compliant recording

The Brilliant Mono-Tech:  Unique & Unequalled high end MONO-TECH technology (Weigh Sensor) to match the highest international standards.

Perfect-Self Auto Calibration (PSAC):  When the ambient temperature changes by a specific value or once a defined time interval has elapsed, it performs Internal Calibration.

Easy Data Transfer: Interface RS 232C Optional USB (Windows direct communication).

Auto off: Automatic shut off for power saving mode.

Overload Protection: Capacity tracker built into display for easily monitoring possible overloads.

GLP:  Built-in clock make all your documents ISO / GLP / GMP compliance.

Excellent Readability:  High-contrast, backlite LCD display 15mm digits size is exceptionally easy to read under any room lighting conditions.

Fast Results: Short measurement times result in save your valuable timeduring each weighing operation. 

• Specialized Large Backlite Alpha numeric LCD Display with A.E.P. (Advance Eye Protection) New.
• Standard RS 232 interface / USB.
• Inbuilt system of internal calibration with initial calibration
• Auto calibration according to change in ambient temperature.
• User selected time calibration
• Various application other than just simple.
• Weighing like
• %
• Filling
• Check Weighing
• Statistic
• Complies to GLP / GMP
• Automatic Zero Tracking features (can be turned OFF by menu code).

The Brilliant Mono-Tech:  Unique & Unequalled high end MONO-TECH technology (Weigh Sensor) to match the highest international standards.

Perfect-Self Auto Calibration (PSAC):  When the ambient temperature changes by a specific value or once a defined time interval has elapsed, it performs Internal Calibration.

Easy Data Transfer: Interface RS 232C Optional USB (Windows direct communication).

Auto off: Automatic shut off for power saving mode.

Overload Protection: Capacity tracker built into display for easily monitoring possible overloads.

GLP:  Built-in clock make all your documents ISO / GLP / GMP compliance.

Excellent Readability:  High-contrast, backlite LCD display 15mm digits size is exceptionally easy to read under any room lighting conditions.

Fast Results: Short measurement times result in save your valuable time during each weighing operation. 

The Brilliant Mono-Tech:  Unique & Unequalled high end MONO-TECH technology (Weigh Sensor) to match the highest international standards.

Perfect-Self Auto Calibration (PSAC):  When the ambient temperature changes by a specific value or once a defined time interval has elapsed, it performs Internal Calibration.

Easy Data Transfer: Interface RS 232C Optional USB (Windows direct communication).

Auto off: Automatic shut off for power saving mode.

Overload Protection: Capacity tracker built into display for easily monitoring possible overloads.

GLP:  Built-in clock make all your documents ISO / GLP / GMP compliance.

Excellent Readability:  High-contrast, backlite LCD display 15mm digits size is exceptionally easy to read under any room lighting conditions.

Fast Results: Short measurement times result in save your valuable timeduring each weighing operation. 

Technology

Nanoris is based on Si-PIN/SDD technology for measuring alloys including precious metals.

Calibration

Pre-calibrated for major alloys and precious metals with elements range from Mg and U.

Ease

Non-destructive testing with one touch operation within few seconds. User friendly & easy to operate doesn’t  require special person to operate.
Compact

Small, light With 1.6kg , weight is very easy to carry & test

Excellent Performance

High-speed processing chip, advanced algorithm and high-responsive software, resulting in even faster analysis.

High-performance X-ray Tube, Ultrahigh Resolution Detector combined with Digital Multi-channel Processing  Technology, yielding super-high detection resolution.

Industrial resistive touch screen, superior to capacitor screen in back-light and clearer against sunlight in the field.

Data Processing

With built in 32GB memory, USB, Bluetooth, data can be exported to EXCEL or PDF formats. Users can customize the reports by adding their company logos, addresses, test results, spectrum and others (such as product description, origin and batch number).

Software

Nanoris software is a professional FP based software which enables the users to easily configure passwords, customize analysis reports.

Safety

Built-in double beam technology can automatically sense whether there is a sample at the measurement window to avoid any damage. Provided with standard Waterproof, dust-proof and shockproof suitcase & Safety Band for safely use of machine.

Power supply system

Intelligent battery management through MSBUS bus , real – time monitoring of the residual capacity of battery and backup battery. A single battery can last upto 8 hours*.

Performance Features

1. Non destructive testing (NDT) Nanoris test does not damage orhave any adverse effect on the use of samples. No damage is foreseenin the entire test process.

2. High-performance X-ray Tube, Ultrahigh Resolution Detector combined with Digital Multi-channel Processing Technology, yielding super-high detection resolution.

3. Resistive Industrial 4.3" touch screen, superior to capacitor screen in backlight and clearer against sunlight in the field. It automatically adjusts display brightness according to the environment brightness.

5. Automatic switch to standby mode when not used and recovery after the machine is picked up, which saves power and extends working time; machine also give out alarm when ambient temperature or humidity exceeds the scope of application.

6. Aczet Ultra-short optical path design can significantly improve light element excitation effects, without the fall/fill condition.

Application Range

Nondestructive, rapid and accurate analysis for:

1. Alloy elements and alloy grade identification on the site.

2. Metal identification / scrap metal sorting.

3. Q A / Q C management in the production of metal, processing and manufacturing, etc.

4. Accurate element analysis of raw material and PMI identification so as to meet production needs and ensure security of equipment and materials used in the process.

X-ray fluorescence (XRF) spectrometry is an elemental analysis technique with broad application in science and industry.

XRF is based on the principle that individual atoms, when excited by an external energy source, emit X-ray photons of a characteristic energy or wavelength.

By counting the number of photons of each energy emitted from a sample, the elements present may be identified and quantitated.

Aczet’s XRF product is based on a German technology, used to measure the composition and purity of materials and is mainly applied in industrial quality control and in process control for manufacturing processes in industries such as Jewellery, Metals and Mining, Construction materials and Chemicals.

Technology:

Different Energy Dispersive Detectors are available for Measurement of XRF, such as proportional counter (PC), PIN Diodes and silicon drift detectors( SDD).

The physical principle of these detectors are very different. A PC uses a mixture of a Noble gas with a quench gas that is ionized by an incident radiation.

The electrons are accelerated in the electric field and can ionized by other gas atoms resulting in an international amplification. In this case the energy for generation of the primary signal is relatively high.

In solid state detector (PIN,SDD), the incident radiation generates charge carriers which are collected by an electric field.

The energy to generate the primary signal is significantly lower than for a PC. that is higher the number of primary charge carriers can be generated. This reduces the statistical error and improves the energy resolution.

Major benefits of XRF

• Versatile testing equipments, potentially solving multiple testing need swith one analyzer.
• Low initial costs compared to other analytical equipment
• Minimum operation costs
• Non-destructive solutions
• Minimal sample preparation
• Instant results 60 to 300 sec.
• Relatively simple technology to learn & obtain accurate, repeatable results.
• Maximum profits through accuracy
• Increase turn around and production output
• In-house quality control

Aczet’s XRF product is based on a German technology, used to measure the composition and purity of materials and is mainly applied in industrial quality control and in process control for manufacturing processes in industries such as jewellery, metals and mining, construction materials and chemicals.

Aczet’s XRF product helps customers to improve product quality and performance, increase productivity, yield and reduce downtime and waste.

The entire operation, the evaluation of the measurement as well as the clear presentation of the measurement data is done on a pc using the powerful and User-friendly Xmaster software.

Features of XMasteR Application

• Empirical calibration mode for calibrating unit using well assessed standard samples.
• Fundamental calibration mode for standard free calibrations.
• Simultaneous quantitative measurement up to 8 elements.
• Qualitative material identification upto 20 elements.
• Spectrum analysis for semi-quantitative concentration measurement.
• Statistical functions with mean value, standard deviation, high/low reading, trend line etc.

Calibration

• Pre-calibrated for Gold and other precious metals.

• Dissolved Oxygen Range 0.00~20.00mg/L
• Dissolved Oxygen Accuracy +/-0.3mg/L /L
• Saturation of Oxygen 0 to 200.0%
• Resolution 0.01mg/L

Technology

Nanoris is based on Si-PIN/SDD technology for measuring alloys including precious metals.

Calibration

Pre-calibrated for major alloys and precious metals with elements range from Mg and U.

Ease

Non-destructive testing with one touch operation within few seconds. User friendly & easy to operate doesn’t require special person to operate

Compact

Small, light With 1.6kg , weight is very easy to carry & test

Excellent Performance

High-speed processing chip, advanced algorithm and high-responsive software, resulting in even faster analysis.

High-performance X-ray Tube, Ultrahigh Resolution Detector combined with Digital Multi-channel Processing Technology, yielding super-high detection resolution.

Industrial resistive touch screen, superior to capacitor screen in back-light and clearer against sunlight in the field.

Data Processing

With built in 32GB memory, USB, Bluetooth, data can be exported to EXCEL or PDF formats. Users can customize the reports by adding their company logos, addresses, test results, spectrum and others (such as product description, origin and batch number).

Software

Nanoris software is a professional FP based software which enables the users

to easily configure passwords, customize analysis reports

Safety

Built-in double beam technology can automatically sense whether there is a

sample at the measurement window to avoid any damage. Provided with

standard Waterproof, dust-proof and shockproof suitcase & Safety Band for

safely use of machine.

Power supply system

Intelligent battery management through MSBUS bus , real – time monitoring of the residual capacity of battery and backup battery. A single battery can last upto 8 hours*.

Performance Features

1. Non destructive testing (NDT) Nanoris test does not damage or

have any adverse effect on the use of samples. No damage is foreseen

in the entire test process.

2. High-performance X-ray Tube, Ultrahigh Resolution Detector combined

with Digital Multi-channel Processing Technology, yielding super-high

detection resolution.

3. Resistive Industrial 4.3" touch screen, superior to capacitor screen in backlight

and clearer against sunlight in the field. It automatically adjusts

display brightness according to the environment brightness.

5. Automatic switch to standby mode when not used and recovery after

the machine is picked up, which saves power and extends working

time; machine also give out alarm when ambient temperature or

humidity exceeds the scope of application.

6. Aczet Ultra-short optical path design can significantly improve

light element excitation effects, without the fall/fill condition.

Application Range

Nondestructive, rapid and accurate analysis for:

1. Alloy elements and alloy grade identification on the site.

2. Metal identification / scrap metal sorting.

3. Q A / Q C management in the production of metal, processing and

manufacturing, etc.

4. Accurate element analysis of raw material and PMI identification so as

to meet production needs and ensure security of equipment and

materials used in the process.

Technology

Nanoris is based on Si-PIN/SDD technology for measuring alloys including precious metals.

Calibration

Pre-calibrated for major alloys and precious metals with elements range from Mg and U.

Ease

Non-destructive testing with one touch operation within few seconds. User friendly & easy to operate doesn’t  require special person to operate.

Compact

Small, light With 1.6kg , weight is very easy to carry & test

Excellent Performance

High-speed processing chip, advanced algorithm and high-responsive software, resulting in even faster analysis.

High-performance X-ray Tube, Ultrahigh Resolution Detector combined with Digital Multi-channel Processing  Technology, yielding super-high detection resolution.

Industrial resistive touch screen, superior to capacitor screen in back-light and clearer against sunlight in the field.

Data Processing

With built in 32GB memory, USB, Bluetooth, data can be exported to EXCEL or PDF formats. Users can customize the reports by adding their company logos, addresses, test results, spectrum and others (such as product description, origin and batch number).

Software

Nanoris software is a professional FP based software which enables the users to easily configure passwords, customize analysis reports.

Safety

Built-in double beam technology can automatically sense whether there is a sample at the measurement window to avoid any damage. Provided with standard Waterproof, dust-proof and shockproof suitcase & Safety Band for safely use of machine.

Power supply system

Intelligent battery management through MSBUS bus , real – time monitoring of the residual capacity of battery and backup battery. A single battery can last upto 8 hours*.

Performance Features

1. Non destructive testing (NDT) Nanoris test does not damage or have any adverse effect on the use of samples. No damage is for eseen in the entire test process.

2. High-performance X-ray Tube, Ultrahigh Resolution Detector combined with Digital Multi-channel Processing Technology, yielding super-high detection resolution.

3. Resistive Industrial 4.3" touch screen, superior to capacitor screen in backlight and clearer against sunlight in the field. It automatically adjusts display brightness according to the environment brightness.

5. Automatic switch to standby mode when not used and recovery after the machine is picked up, which saves power and extends working time; machine also give out alarm when ambient temperature or humidity exceeds the scope of application.

6. Aczet Ultra-short optical path design can significantly improve light element excitation effects, without the fall/fill condition.

Application Range

Nondestructive, rapid and accurate analysis for:

1. Alloy elements and alloy grade identification on the site.

2. Metal identification / scrap metal sorting.

3. Q A / Q C management in the production of metal, processing and manufacturing, etc.

4. Accurate element analysis of raw material and PMI identification so as to meet production needs and ensure security of equipment and materials used in the process.